AP TM ROLLER BEARINGS SERVICE

Contact Now

It is recommended that cone assemblies be returned to Timken for reconditioning. Wash using only water and detergent solutions, not exceeding 190˚ F. Visually inspect for damage. Only remove rollers from the marked “inspection” pocket (if cage is provided with this feature). Check and ensure proper roller orientation when reapplying these rollers. Separable roller should only be reassembled into the cone from which it was removed. DO NOT mix rollers. DO NOT disassemble or attempt to reapply other rollers. DO NOT stress relieve cone assemblies and DO NOT plate cone bores of cone assemblies with cages applied. Failure to follow these guidelines could lead to unsatisfactory bearing performance and equipment damage

HM129848 -90142 AP Integrated Bearing Assemblies

HM129848 -90142 1 pcs
Negotiable

HM127446 -90120 AP Bearings for Industrial Application

140mm Open Type
In Stock 0.02 KGS

HM124646 -90086 Tapered Roller Bearings Assembly

Internally Sealing 82.6 mm
Click here 150 mm

HM120848 -90080 AP TM ROLLER BEARINGS SERVICE

150 mm Without Snap Ring
Round 749

Backing ring K95200-90010 APTM Bearings for Industrial Applications

82000 lb 3-7/16 in
ANSI/ABMA STD 9 Adapter Mount

Backing ring K147766-90010 Timken Ap Bearings Industrial Applications

Max 220° Lubrication Fitting
5.5625 in 1.1719 in

Backing ring K85516-90010 Timken AP Bearings Assembly

200° °F 3.4375 in
3.4375 in Set Screw

Backing ring K85095-90010 Integrated Assembly Caps

Cast Bronze C93200 & 1/2 in
4000 psi 75000

Backing ring K85525-90010 compact tapered roller bearing units

9.3750 in 19.3750 to 21.6250
Split Pillow Block 737533038124

Backing ring K85588-90010 AP Integrated Bearing Assemblies

In Stock 0.625 Inch
0.438 Inch ljt5/8-rhp

Backing ring K86874-90010 AP Bearings for Industrial Application

1.5 mm 5530 RPM
100 mm 25 mm

H337846 - 90270 Tapered Roller Bearings Assembly

UGT200 Lubrication Fitting
6590 lbf 4-31/64 in
1/19