ISB 6222-Z deep groove ball bearings

Characteristic rolling element frequency, BSF:4.8 Hz; Characteristic outer ring frequency, BPF0:3.6 Hz; ra max:1 mm; Da max:73.5 mm; Dynamic load, C:29.1 kN; Nlim:14,000 rpm; da min:46.5 mm; Characteristic cage frequency, FTF:0.4 Hz; Max operating temperature, Tmax:120 °C; Min operating temperature,

C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; d:15 mm; B1:43.5 mm; d1:32.4 mm; S:17 mm; B:34 mm; C:16 mm; T min.:-40 °C; SW:3 mm;

sealing TA:SC 505 TA; end cover EC:SC505EC; D:52 mm; u:15 mm; V-ring option:V20A; m2:152 mm; a:165 mm; P 150°:60 kN; n2:32 mm; c:19 mm;

L:385 mm; Weight:38.6 kg; s1:58.5 mm; Recommended tightening torque for set screw:75 Nm; C0:178 kN; A2:80 mm; C:205 kN; T min.:-20 °C; S:46 mm; T max.:100 °C;

Dynamic load, C:7.75 kN; Characteristic cage frequency, FTF:0.37 Hz; Radial clearance class:C3; D:35 mm; Mass:0.04 kg; da min:19 mm; Characteristic outer ring frequency, BPF0:2.61 Hz; B:11 mm; Characteristic inner ring frequency, BPFI:4.39 Hz; ra max:0.6 mm;

L1:260 mm; A5:32.6 mm; C:35.1 kN; A:31 mm; B:51.6 mm; Recommended tightening torque for set screw:16.8 Nm; C0:23.2 kN; SW:4.76 mm; G:R1/8"; S:19 mm;

S:21.4 mm; Weight:0.87 kg; d1:62 mm; Recommended tightening torque for set screw:11.5 Nm; B2:18.3 mm; T max.:100 °C; C:22 mm; B:42.8 mm; d:45 mm; SW:4 mm;

H2:71 mm; Weight:0.73 kg; Dz:60 mm; Recommended tightening torque for set screw:3.9 Nm; Designation of open end cover:SCOU205-16; L:76 mm; N:M10; J:50.8 mm; T max.:100 °C; T min.:-20 °C;

G:M6x1; d:30 mm; H:39.7 mm; Designation of housing:PLE206-; N:14mm; T min.:-40 °C; A:41.5 mm; S:18.2 mm; T max.:100 °C; H1:14.5 mm;

Recommended tightening torque for set screw:11.5 Nm; S:16.7 mm; N:16mm; d:25 mm; L:110 mm; H3:80; A4:22 mm; A:29 mm; d1:42.8 mm; B:34.9 mm;

Nlim (grease):4,300 rpm; Max operating temperature, Tmax:110 °C; Dynamic load, C:43.5 kN; rs min:1.5 mm; Static load, C0:29.2 kN; Characteristic cage frequency, FTF:0.41 Hz; d:55 mm; D:100 mm; Fatigue limit load, Cu:1.33 kN; da min:63 mm;

Designation of housing:PH207N-; C:25.7 kN; A1:30 mm; H1:19 mm; A:60 mm; s1:21.45 mm; Z:21 mm; S:17.5 mm; J:127 mm; Recommended tightening torque for set screw:8 Nm;

T min.:-40 °C; L:140 mm; e:29 mm; T max.:100 °C; A2:67.8 mm; B:53.7 mm; H:250 mm; Recommended tightening torque for set screw:16.8 Nm; s1:26.85 mm; G:M6x1;

Nlim (grease):5,400 rpm; Max operating temperature, Tmax:110 °C; Fatigue limit load, Cu:0.69 kN; Radial clearance class:CN; Da max:70 mm; ra max:1 mm; Characteristic outer ring frequency, BPF0:5.55 Hz; Dynamic load, C:21 kN; Brand:NTN; Characteristic inner ring frequency, BPFI:7.45 Hz;

d:60 mm; P:300 mm; C:52.5 kN; SW:5 mm; T max.:100 °C; s1:39 mm; d1:82 mm; B:33.4 mm; C0:32.8 kN; T min.:-40 °C;